User Tools
docs:become
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
docs:become [2020/04/01 21:45] pklapetek |
docs:become [2020/04/02 11:47] pklapetek |
||
|---|---|---|---|
| Line 27: | Line 27: | ||
| When inspected in detail, it can be seen that there is a slight asymmetry in the result which needs to be analyzed, probably due to wrong placement of far-field points. The average intensity of the s+1 and s-1 diffraction orders is 0.178 of the incident intensity for the default silver model (not the Become one). | When inspected in detail, it can be seen that there is a slight asymmetry in the result which needs to be analyzed, probably due to wrong placement of far-field points. The average intensity of the s+1 and s-1 diffraction orders is 0.178 of the incident intensity for the default silver model (not the Become one). | ||
| + | |||
| + | {{:docs:becomefit.png?600|}} | ||
| + | |||
| + | List of different settings and results: | ||
| + | |||
| + | * metal setting: 6 1.03583 0 1.37537e+16 1.25733e+14 2.1735 -0.504659 7.60514e+15 4.28131e+15 0.554478 -1.48944 6.13809e+15 6.62262e+14 means n=(0.129 + 3.87i) and leads to first order diffraction of 0.172 | ||
| + | * default metal setting: 6 0.89583 0 13.8737e15 0.0207332e15 1.3735 -0.504659 7.59914e15 4.28431e15 0.304478 -1.48944 6.15009e15 0.659262e15 means n=(0.036 + 4.147i) and leads to first order diffraction of 0.178 | ||
| + | |||
| ===== 3D calculation ===== | ===== 3D calculation ===== | ||
docs/become.txt ยท Last modified: 2020/04/24 12:27 by pklapetek
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial 4.0 International
