GSvit documentation

open source FDTD solver with GPU support

User Tools

Site Tools


docs:become

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
docs:become [2020/04/14 14:29]
pklapetek
docs:become [2020/04/14 14:31]
pklapetek
Line 20: Line 20:
 However, if we are interested in the maximum in some diffraction order direction, it is much simpler and it seems that this is the preferably used approach - we calculate the far field value only at the diffraction order maximum. Luckily enough, this value is dependent on the aperture only, which constructs the envelope for the diffraction pattern, so in this case one could work only with a single aperture. However, to construct the diffraction pattern is a good way how to debug the problem. However, if we are interested in the maximum in some diffraction order direction, it is much simpler and it seems that this is the preferably used approach - we calculate the far field value only at the diffraction order maximum. Luckily enough, this value is dependent on the aperture only, which constructs the envelope for the diffraction pattern, so in this case one could work only with a single aperture. However, to construct the diffraction pattern is a good way how to debug the problem.
  
-A comparison of the different evaluation methods is shown below. ​+A comparison of the different evaluation methods is shown below, also showing the first 
 +diffraction order direction.
 It shows a transmission grating that is evaluated different ways. First of all, analytical results for single aperture, for three apertures and nine apertures are shown. Results from It shows a transmission grating that is evaluated different ways. First of all, analytical results for single aperture, for three apertures and nine apertures are shown. Results from
 periodic calculation (based on a single motive) where the far field is evaluated from three periodic calculation (based on a single motive) where the far field is evaluated from three
 and nine virtual repetitions are then compared to the case where the calculation is not periodic and nine virtual repetitions are then compared to the case where the calculation is not periodic
-and three apertures are physically existing in the computational domain.+and three apertures are physically existing in the computational domain. ​
  
 An important message is that An important message is that
docs/become.txt · Last modified: 2020/04/24 12:27 by pklapetek